Repair Procedures: Adjustment

Perform diagnostic procedure by using diagnostic device as shown below:

1. Connect self-diagnosis connector (16pins) located under the driver side crash pad to self-diagnosis device, and then turn the self-diagnosis device after key is ON.
2. Select the "vehicle model" and "ESP/ESC" on GDS vehicle selection screen, then select OK.

[Variant Code Reset] 

Courtesy of HYUNDAI MOTOR AMERICA

[Variant Coding] 

Courtesy of HYUNDAI MOTOR AMERICA

Courtesy of HYUNDAI MOTOR AMERICA

[Longitudinal G Sensor Calibration] 

Courtesy of HYUNDAI MOTOR AMERICA

Assembly Check (ECU replacement) 

Courtesy of HYUNDAI MOTOR AMERICA