Repair Procedures: Removal
WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the coupling assembly.
(Refer to REMOVAL 4 Wheel Drive (4WD) System - "Coupling Assembly")
NOTE:- Keep it level with the sticker (A) on the top of the coupling.
- Remove the extension cable (A) and then loosening the pressure sensor (B).
Tightening torque:
8.8 - 10.8 N.m (0.9 - 1.1 kgf.m, 6.5 - 7.9 lb-ft)