LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Santa Fe SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Tires/Wheels/Alignment) >> Alignment >> Repair Procedures >> Rear Wheel Alignment >> Camber

Rear Wheel Alignment: Camber

WARNING: This page is about a different car, the 2020 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the nut holding the rear lower arm cam bolt (A).
  2. Adjust rear camber by turning the rear lower arm cam bolt (A) clockwise or counter clockwise. Rear camber adjustment should be made by turning the right and left cam bolt by the same amount.

    Camber angle:  -1.0° ± 0.5°

    G12993531Courtesy of HYUNDAI MOTOR AMERICA
  3. When completing the toe adjustment, tighten the nut to specified torque.

    Tightening torque: 

    137.3 - 156.9 N.m (14.0 - 16.0 kgf.m, 101.3 - 115.7 lb-ft)

scientia non olet · About LEMON Manuals