Repair Procedures: Inspection

If a part of the head up display footage is distorted or it is not at eye level with the driver a Global Diagnostic System (GDS) can be used to carry out calibration.

1. In case calibration is required
   • When replacing the head-up display unit.
   • In case the footage is distorted after replacing the windshield (double vision removed after film is inner mounted to the glass).
   • When the HUD mounted main crashpad is removed/installed or replaced.
   • When the video installation location of the Head-up display unit is not at eye level of the driver and the focus is inconsistent.
2. Calibration items

   No	Footage calibration functions	Calibration cases
   1	Rotation: Calibration in the half-circle/clockwise direction based on the center	Courtesy of HYUNDAI MOTOR AMERICA
   2	Smile: Calibration based vertically on the center	Courtesy of HYUNDAI MOTOR AMERICA
   3	Slanted (up/down): Calibration according to an upward/downward slant	Courtesy of HYUNDAI MOTOR AMERICA
   4	Slanted (left/right): Calibration according to a left/right slant	Courtesy of HYUNDAI MOTOR AMERICA
   5	Parallel compensation	Courtesy of HYUNDAI MOTOR AMERICA
   6	Move location of mark to upward/downward: Compensation according to eye height	Courtesy of HYUNDAI MOTOR AMERICA
   7	Initialization: Changed to the status of before video compensation