LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra Sport, Standard Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Manual Transaxle Control System - 1.6L >> Control Shaft Complete >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
NOTE:
  • When installing, set control shaft lever to neutral position.
    G12972076Courtesy of HYUNDAI MOTOR AMERICA
  • When installing, apply the sealant as shown in the illustration below.

    Specified sealant  : MS 721-40 or MS721-38

G12972077Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
  • Check operating of lever of transaxle side when operating shift lever after assembly. (1-6, R)
scientia non olet · About LEMON Manuals