LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra Sport, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the ignition switch connector (A) and key warning switch connector (B) from under the steering column.
  2. Check for continuity between the terminals.
  3. If continuity is not specified, replace the switch.
    G12980121Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals