LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Manual Transaxle Control System - 1.6L) >> Control Shaft Complete >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
NOTE:
  • When installing, set control shaft lever to neutral position.
    G12972076Courtesy of HYUNDAI MOTOR AMERICA
  • When installing, apply the sealant as shown in the illustration below.

    Specified sealant  : MS 721-40 or MS721-38

G12972077Courtesy of HYUNDAI MOTOR AMERICA
CAUTION:
  • Check operating of lever of transaxle side when operating shift lever after assembly. (1-6, R)