LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Elantra GT N Line, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Lift the vehicle.
  3. Disconnect the canister close valve connector (A).
  4. Disconnect the ventilation hose (B).
  5. Remove the fuel tank air filter after removing the mounting bolts (C).
    G13015663Courtesy of HYUNDAI MOTOR AMERICA
  6. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figure.
G13015664Courtesy of HYUNDAI MOTOR AMERICA
G13015665Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals