LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2019 >> Accent SE, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Block >> Water Jacket Separator >> Repair Procedures >> Remove And Installation

Remove And Installation

  1. Remove the cylinder head assembly.

    (Refer to Cylinder Head Assembly - "CYLINDER HEAD ")

  2. Remove the water jacket separator (A).
    G12594311Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • Be careful not to deform or damage it when removing.
  3. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals