LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Value, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 1.6L (3 Of 3) >> DTC P0620: Alternator Control Circuit >> Component Inspection >> Check ECM Performance

Check ECM Performance

  1. IG "OFF".
  2. Select "Vehicle scopemeter" in the menu, and connect channel A of GDS with FR terminal of Alternator harness connector.
  3. Connect Channel B of GDS with C terminal of Alternator harness connector.
  4. Engine start. And check the signal waveforms. (Compare the signal waveform of electrical loads ON with OFF)

    Specification:  Refer to Signal Waveform & Data 

  5. Is the measured signal waveforms of Alternator normal?

    YES 

    NO 

    • Substitute with a known - good ECM and check for proper operation. If the problem is corrected, replace ECM and go to "Verification of Vehicle Repair " procedure.
scientia non olet · About LEMON Manuals