Motor Driven Power Steering DTCS
WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
MOTOR DRIVEN POWER STEERING DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC C1101 | 00: Battery Voltage High |
| DTC C1102 | 00: Battery Voltage Low |
| DTC C1109 | 00: IGN Signal Error |
| DTC C1112 | 00: Sensor Source Voltage |
| DTC C1261 | 00: Steering Angle Sensor Not Calibrated |
| DTC C1290 | 00: Torque Sensor Signal Error |
| DTC C1603 | 00: MDPS Thermal Protection |
| DTC C1604 | 00: ECU Hardware Error |
| DTC C1611 | 00: CAN Time-out ECM |
| DTC C1616 | 00: CAN Bus Off |
| DTC C1622 | 00: Vehicle Speed Signal Error |
| DTC C1628 | 00: CAN Timeout - Cluster |
| DTC C1633 | 00: VANS Vehicle Signal Error |
| DTC C1692 | 00: CAN Time-out VSM |
| DTC C1693 | 00: CAN Signal Error VSM |
| DTC C1696 | 00: CAN time-out SPAS |
| DTC C1697 | 00: CAN Message Failure - SPAS |
| DTC C1702 | 00: Variant Coding Error |
| DTC C1704 | 00: ECU Fail-Safe Relay Fault |
| DTC C1804 | 00: CAN time out LKAS |
| DTC C1805 | 00: CAN Signal Failure LKAS |
| DTC C2401 | 00: Motor Position Sensor Error |
| DTC C2412 | 00: Motor Short or Open |
| DTC C2413 | 00: Motor Current Error |