LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.0L >> Shift Cable >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  2. Battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Remove the nut (A) from the manual control lever.
  4. Remove the shift cable (B) from the bracket (C) at transaxle side.
    G12612107Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ")

  6. Remove the snap pin (A).
    G12612108Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the air duct (A).
    G12612109Courtesy of HYUNDAI MOTOR AMERICA
  8. Disconnect the shift cable.
    1. Disconnect the cable bracket (B) from the shift lever after pushing the lock.
    2. Disconnect the cable holer (A) from the shift lever.
      G12612110Courtesy of HYUNDAI MOTOR AMERICA
  9. Remove the airbag module.

    (Refer to Restraint - "AIRBAG MODULES AND CLOCK SPRING " )

  10. Disconnect the shift cable retainer (B) after removing the nuts.
  11. Remove the shift cable by pulling it toward the interior.
    G12612111Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals