Buzzer Operation Mode

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.

Operation	Request source	Number of buzzer cycles	Number of hazard cycles	Comment
Start opening	Outside Switch	2	2	Delay start of liftgate until first cycle is over
	Inner Switch
	Console Switch
	Remote Key
	Smart Key
Start closing	Outside Switch	2	2
	Inner Switch
	Console Switch
	Remote Key
	Smart Key
Direct direction change (Open -> Close) (Area: Closed - Maximum end point for closing)	Outside Switch	2	2	No delay (Reversing and buzzing at the same time) Only delay due to mechanical system
	Inner Switch
	Console Switch
	Remote Key
	Smart Key
Obstacle detection (Reverse operation start)	-	3	-	-
Vehicle speeds when liftgate is open	-	10	-	Stop condition Complete 10 times. Liftgate full lock.
Adjust height	Inner Switch	2	-	-
Initialization (Deleting end position and basic position)	Inner Switch & Outside Switch	1	-	-
Initialization (Learning end point)	-	-	2	-
Initialization (During calibration)	-	Continuous	-	-
Liftgate not closed	-	10	10	Liftgate closed but lock switch not off (Still open)
Error detect	-	3	-	APS error Spindle error Hall sensor error System error (EEPROM error) Voltage error (Over/Under) PCU error Latch position error Stuck switches. (Switch pressed more than 30 sec) Thermal protection