LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (MULTIFUNCTION Switch) >> Repair Procedures >> Inspection >> Multifunction Switch Inspection

Multifunction Switch Inspection

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for continuity between the terminals in each switch position as displayed below.
    Fig 1: Checking Continuity Between Terminals In Switch Position
    G12042604Courtesy of HYUNDAI MOTOR AMERICA
    Switch Switch Position Switch Terminal Resistance (Ω, ±3.5%)
    Front wiper switch MIST 1-9 330
    OFF ∞
    Intermittent (AUTO) 800
    LOW 1800
    HIGH 5700
    Rear wiper switch OFF 9-16 ∞
    LOW 910
    HIGH 2910
    Wiper intermittent volume Volume 1 7-9 330
    Volume 2 690
    Volume 3 1310
    Volume 4 2610
    Volume 5 7310
    Fog lamp switch OFF 9-10 ∞
    Front foglamp 910
    Turn signal switch OFF 9-12 ∞
    Left 910
    Right 2910
    Dimmer & Passing switch OFF 9-13 ∞
    Passing 910
    Dimmer 2910
    Light switch OFF 9-14 ∞
    AUTO/DRL 680
    Tail lamp 1680
    Low beam 5580