LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Control System - 1.6L) >> RCV Control Solenoid Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air duct (A).

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the RCV control solenoid valve connector (A) and vapor hoses (B).
  4. Remove the RCV control solenoid valve (D) by loosening the mounting bolts (C).
Fig 1: Locating RCV Control Solenoid Valve, Connector, Vapor Hoses And Mounting Bolts
G12039439Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals