LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Control System - 1.6L) >> ETC Electronic Throttle Control System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
    Fig 1: Locating ETC Module Connector
    G12039354Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the installation bolts, and then remove the ETC module (A) from the engine.
Fig 2: Locating ETC Module And Installation Bolts
G12039355Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals