LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Control System - 1.6L) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the under cover front panel.

    (Refer to Engine Mechanical System - "ENGINE AND TRANSAXLE ASSEMBLY ")

  3. Disconnect the connector, an then remove the ambient temperature sensor (A).
Fig 1: Locating Ambient Temperature Sensor
G12039367Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals