LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SEL Plus, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Front Suspension System) >> Front Strut Assembly >> Repair Procedures >> Disposal

Repair Procedures: Disposal

WARNING: This page is about a different car, the 2017 Hyundai Tucson. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully extend the piston rod.
  2. Drill a hole on the A section to remove gas from the cylinder.
Fig 1: Removing Gas From Cylinder
G12041093Courtesy of HYUNDAI MOTOR AMERICA
CAUTION: The gas coming out is harmless, but be careful of chips that may fly when drilling.
Be sure to wear safety goggles or eye protection when performing this task.
scientia non olet · About LEMON Manuals