LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson SE, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Canister Close Valve (CCV) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Turn the ignition switch OFF
  2. Disconnect the CCV connector
  3. Measure resistance between the CCV terminal 1 and 2
  4. Check that the resistance is within the specification.

    Specification: Refer to " SPECIFICATION  " 

  5. Disconnect the vapor hose connected with the canister from the CCV
  6. Connect a vacuum pump to the nipple
  7. Ground the CCV control line and apply battery voltage to the CCV power supply line
  8. Apply vacuum and check the valve operation.

    Specification: Vacuum maintained 

scientia non olet · About LEMON Manuals