LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Tucson Limited, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Transfer Fluid >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Information 

  1. Remove the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  2. Remove the oil filler plug (A).

    [Gasline 2.0 GDI] 

    G12609347Courtesy of HYUNDAI MOTOR AMERICA

    [Gasline 1.6 T-GDI] 

    G12609348Courtesy of HYUNDAI MOTOR AMERICA
  3. Check the oil level.

    Information 

    Oil level must be up to fill the hole, if not, add oil until it runs over.

    G12609349Courtesy of HYUNDAI MOTOR AMERICA
  4. Install the oil filler plug with new gasket.

    Tightening torque: 

    39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

  5. Install the under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")