LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Ultimate >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Liftgate Module >> Power Liftgate Latch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. After loosening the mounting screws, then remove the liftgate trim (A).

    (Refer to TAIL GATE TRIM . )

    G12036241Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the liftgate latch assembly (A) after loosening the mounting bolts.
    G12036242Courtesy of HYUNDAI MOTOR AMERICA
  4. Loosen the PCU (Power Closing Unit) mounting nuts.
    G12036243Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the power liftgate latch connector (A) and PCU connector (B).
    G12036244Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the power liftgate latch & PCU assembly (A).
G12036245Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals