LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Cooling System) >> Cooling Fan >> Repair Procedures >> Removal and Installation >> PWM Module

PWM Module

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery "-" terminal.
  2. Remove the LH front wheel guard.

    (Refer to "FRONT WHEEL GUARD ")

  3. Disconnect the connectors (A) and then remove the PWM (B).
    G12033677Courtesy of HYUNDAI MOTOR AMERICA
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals