Repair Procedures: Removal
- Remove the rear wheel and tire (A) from rear hub.
Tightening torque:
107.9 ~ 127.5 N.m (11.0 ~ 13.0 kgf.m, 79.6 ~ 94.0 lb-ft)
NOTE:- Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).
- Support the rear lower arm (A) with a jack as shown in the illustration.CAUTION:
- Certainly install Jack as being danger because of the tension.
- Remove the spring (A), the upper pad (B) and the lower pad (C).
Tightening torque:
137.3 ~ 156.9 N.m (14.0 ~ 16.0 kgf.m, 101.3 ~ 115.7 lb-ft)
- Installation is the reverse of removal.
- Check the rear alignment.
(Refer to "REAR ALIGNMENT ")