LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Audio System) >> Audio Remote Control >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for resistance between terminals in each switch position.
Fig 1: Locating Audio Remote Control Connector Terminals
G12035071Courtesy of HYUNDAI MOTOR AMERICA
AUDIO TERMINAL RESISTANCE SPECIFICATIONS

Switch Connector terminal Resistance (± 5%)
SEEK up 2-7 430 Ω
SEEK down 2-7 1.11 kΩ
Mode 2-7 2.11 kΩ
Mute 2-7 3.11 kΩ
Volume up 2-7 4.61 kΩ
Volume down 2-7 6.81 kΩ
CRUISE & FLEX TERMINAL RESISTANCE SPECIFICATIONS

Switch Connector terminal Resistance (± 5%)
CANCEL 2-7 180 Ω
RES + 2-7 330 Ω
SET - 2-7 550 Ω
Cruise ON/OFF 2-7 880 Ω
Limit 2-7 1.44 kΩ
Flex 2-7 5.54 kΩ
BLUETOOTH & VOICE TERMINAL RESISTANCE SPECIFICATIONS

Switch Connector terminal Resistance (± 5%)
Voice 2-5 10.71 kΩ
End 2-5 18.911 kΩ
Send 2-5 40.91 kΩ
TRIP TERMINAL RESISTANCE SPECIFICATIONS

Switch Connector terminal Resistance (± 5%)
Group 2-5 330 Ω
Trip 2-5 550 Ω
Select/Reset 2-5 880 Ω