LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Fuel Delivery System) >> Fuel Line >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF, and then remove battery (-) cable.
  2. Release the residual pressure in fuel line.

    (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE ")

  3. Disconnect the low pressure fuel quick-connector (A).
    G12034129Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the vapor hose (A) which is connected from the PCSV.
    G12034130Courtesy of HYUNDAI MOTOR AMERICA
  5. Lift the vehicle.
  6. Remove the fuel tank.

    (Refer to "FUEL TANK ")

  7. Disconnect the vapor tube quick-connector (A).
    G12034131Courtesy of HYUNDAI MOTOR AMERICA
  8. Open the vapor tube and low fuel line fixing clip to using driver.
  9. Release the under cover (A) after remove the mounting bolts.
    G12034132Courtesy of HYUNDAI MOTOR AMERICA
  10. Disconnect the fuel & brake line protect (A) from the fixing clip.
    G12034133Courtesy of HYUNDAI MOTOR AMERICA
  11. Disconnect the fuel line fixing bracket (A) to engine room low.
    G12034134Courtesy of HYUNDAI MOTOR AMERICA
  12. Remove the fuel line.
scientia non olet · About LEMON Manuals