LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Fuel Delivery System) >> Filler-Neck Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lift the vehicle.
  2. Disconnect the fuel filler hose (A).
  3. Disconnect the ventilation tube quick-connector (B).
    G12034135Courtesy of HYUNDAI MOTOR AMERICA
  4. Open the fuel filler door and unfasten the filler-neck assembly mounting screw (A).
    G12034136Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the rear-LH wheel, tire and the inner wheel house.
  6. Remove the filler-neck assembly from the vehicle after removing the bracket mounting nut (A).
G12034137Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals