LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Control System) >> Knock Sensor (KS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Install the component with the specified torques.
  • Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.
CAUTION:
  • The sensor connector must be installed parallel to the direction of the engine.
  1. Installation is reverse of removal.

    Knock sensor installation bolt: 

    15.7 ~ 23.5 N.m (1.6 ~ 2.4 kgf.m, 11.6 ~ 17.4 lb-ft)

scientia non olet · About LEMON Manuals