Repair Procedures: Removal
WARNING: This page is about a different car, the 2017 Hyundai Santa Fe XL and 2017 Hyundai Santa Fe. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the floor console.
(Refer to "FLOOR CONSOLE ")
- Remove the air duct.
- Disconnect the shift cable (A).
- Remove the retainer (A) and nut (B).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
- Remove the nut (C) from the manual control lever.
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
- Remove the cable (B) from the bracket (A) at transaxle assembly side.
- Remove the shift cable by pulling it toward the interior.