LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe XL Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Block >> Water Jacket Separator >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install the water jacket separator 1# (A) and 2# (B).
    G12033599Courtesy of HYUNDAI MOTOR AMERICA
    NOTE: Insert the separator align with block inner side protrusion, and it must be located under the cylinder head installing surface.
    G12033600Courtesy of HYUNDAI MOTOR AMERICA
    G12033601Courtesy of HYUNDAI MOTOR AMERICA
  2. Install the LH/RH cylinder head assembly and gasket.

    (Refer to "CYLINDER HEAD ")

scientia non olet · About LEMON Manuals