LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe Sport Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Transfer Assembly) >> Front Wheel Transfer Assembly >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    NOTE:
    1. Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
    2. Smear and cover splines (B) with molybdenum type high pressure grease.

      TECHLUBE MEGAMAX - ALPHA OR EQUIVALENT

      Fig 1: Locating O-Ring
      G12055843Courtesy of HYUNDAI MOTOR AMERICA
    3. Install the propeller shaft to be near runout marking (Transfer assembly 1-EA, propeller shaft 1-EA) each other.
      Fig 2: Installing Propeller Shaft To Runout Marking
      G12055844Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals