LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - 2.4L >> Inhibitor Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Make sure vehicle does not roll before setting shift lever to "N" position.
  2. Disconnect the negative (-) battery cable.
  3. Remove the air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  4. Remove the battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  5. Disconnect the inhibitor switch connector (A).
  6. Remove the shift cable mounting nut (B).
    Fig 1: Locating Inhibitor Switch Connector And Shift Cable Mounting Nut
    G12051448Courtesy of HYUNDAI MOTOR AMERICA
  7. Remove the manual control lever (B) and the washer after removing a nut (A).
    Fig 2: Locating Manual Control Lever And Nut
    G12051449Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the inhibitor switch (A) after removing the bolts (2 ea).
    Fig 3: Locating Inhibitor Assembly Bolts
    G12051450Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals