LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe Sport Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Smart Cruise Control System >> Smart Cruise Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the steering wheel.

    (Refer to MDPS COLUMN AND HOUSING Steering System)

  4. Remove the steering wheel cover (A) after loosening the screws.
    Fig 1: Removing Steering Wheel Cover Screws (1 Of 2)
    G12053779Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Removing Steering Wheel Cover Screws (2 Of 2)
    G12053780Courtesy of HYUNDAI MOTOR AMERICA
  5. Loosen the screws after disconnecting the steering wheel remote control switch connector (A).
    Fig 3: Disconnecting Steering Wheel Remote Control Switch Connector
    G12053781Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the remote control switches (A).
    Fig 4: Removing Remote Control Switches
    G12053782Courtesy of HYUNDAI MOTOR AMERICA