LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Electrical >> Starter >> Engine Starting System >> Starter Relay >> Repair Procedures >> Inspection

Repair Procedures: Inspection

  1. Disconnect the battery negative terminal.
  2. Remove the fuse box cover.
  3. Remove the starter relay (A).
    G12033848Courtesy of HYUNDAI MOTOR AMERICA
  4. Using an ohmmeter, check that there is continuity between each terminal.
    STARTER RELAY CONTINUITY SPECIFICATIONS

    Terminal Continuity
    30 - 87 NO
    85 - 86 YES
  5. Apply 12V to terminal 85 and ground to terminal 86.

    Check for continuity between terminals 30 and 87.

    Fig 1: Starter Relay Circuit Diagram
    G12033849Courtesy of HYUNDAI MOTOR AMERICA
  6. If there is no continuity, replace the starter relay.
  7. Install the starter relay.
  8. Install the fuse box cover.
scientia non olet · About LEMON Manuals