LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Alternator >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the battery negative terminal.
  2. Remove the engine cover.
  3. Disconnect the alternator connector (A) and cable (B) from the "B" terminal.
    G12033804Courtesy of HYUNDAI MOTOR AMERICA
  4. To release the tension, turn the drive belt tensioner counterclockwise then remove the drive belt (A).
    Fig 1: Locating Drive Belt Routing Diagram
    G12033805Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the alternator (A).
G12033806Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals