LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Auto Lighting Control System >> Auto Light Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the photo & auto light sensor (A) from crash pad upper side by using screw (-) driver.
    G12036399Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the auto light connector.
scientia non olet · About LEMON Manuals