LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Smart Cruise Control System >> Smart Cruise Control Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module.

    (Refer to "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the steering wheel.

    (Refer to REPAIR PROCEDURES . )

  4. Remove the steering wheel cover (A) after loosening the screws.
    G12033898Courtesy of HYUNDAI MOTOR AMERICA
    G12033899Courtesy of HYUNDAI MOTOR AMERICA
  5. Loosen the screws after disconnecting the steering wheel remote control switch connector (A).
    G12033900Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the remote control switches (A).
    G12033901Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals