LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Ioniq Plug-In Hybrid Limited >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System (PHEV) >> Fuel Pump Motor >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the fuel pump.

    (Refer to Fuel System - "FUEL PUMP ")

  2. Disconnect the fuel pump motor connector (A) and fuel sender connector (B).
    G12727251Courtesy of HYUNDAI MOTOR AMERICA
  3. Press the fixing hook (A) with a driver and then remove fuel sender (B) in the arrow direction.
    G12727252Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel feed tube (B) after removing the fixing pin (A).
    G12727253Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the head assembly (B) after releasing the fixing hooks (A).
    G12727254Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the reservoir-cup (B) after releasing the fixing hooks (A).
    G12727255Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the ground line (A).
  8. Disconnect the fuel pump motor connector (A).
    G12727256Courtesy of HYUNDAI MOTOR AMERICA
  9. Disconnect the fuel pressure regulator (B) after removing the fixing pin (A).
    G12727257Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the free filter p (B) after releasing the fixing hooks (A).
    G12727258Courtesy of HYUNDAI MOTOR AMERICA
  11. Remove the fuel pump motor (A) from the fuel filter.
    G12727259Courtesy of HYUNDAI MOTOR AMERICA
    G12727260Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals