LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 218 (Front Door Assembly) >> Front Door Outside Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the plug hole (B).
  2. After loosening the mounting bolt, remove the front door lock assembly (A).

    Tightening torque: 

    7.8 - 10.8 N.m (0.8 - 1.1 kgf.m, 5.8 - 8.0 lb-ft)

    Fig 1: Locating Front Door Lock Assembly And Plug Hole With Mounting Bolt
    G12022572Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the front door outside handle (A) by sliding it forward.
    Fig 2: Locating Front Door Outside Handle
    G12022573Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the front door outside handle connector (A) by pushing the locking pin.
    Fig 3: Locating Front Door Outside Handle Connector
    G12022574Courtesy of HYUNDAI MOTOR AMERICA
  5. To install, reverse the removal procedure.

    Information 

    • Make sure the connector is connected properly.
    • Make sure the door locks/unlocks and opens/closes properly.
    • Be sure to install the outside handle pad (A) between the outside handle and the door panel.
    Fig 4: Locating Outside Handle Pad
    G12022575Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals