Repair Procedures: Removal
WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- The dust or foreign substance on the rain sensor have a bad effect upon the rain sensor capability, so protect the sensor surface with protection cover until installing the rain sensor to bracket for accurate function.
- The coupling pad on the rain sensor surface has adhesive strength, so the coupling pad could stick to the windshield by environment condition during the using time.
- If separate it by force, it could be damaged. So make sure to separate the rain sensor from the windshield carefully.
- Remove the rain sensor cover (A).
- Disconnect the wiring harness connector (A).
- Be careful not to damage the cover latch by applying excessive force. To remove the latch, pull aside the latch using the cover hole with a small flat-blade screwdriver (A).
Courtesy of HYUNDAI MOTOR AMERICA
- Rain sensor module is attached to the front windshield by glue replacing the front windshield, remove the rain sensor module from the existing front windshield and install on the new front windshield.