Repair Procedures: Installation

Install the drive belt.
1. Install the drive belt (B) and then install the drive belt tensioner (A).
  Tightening torque
  
  center bolt:
  
  29.4 - 41.2 N.m (3.0 - 4.2 kgf.m, 21.7 - 30.4 lb-ft)
  
  fixing bolt:
  
  39.2 - 49.0 N.m (4.0 - 5.0 kgf.m, 28.9 - 36.2 lb-ft)
  
  Fig 1: Locating Drive Belt And Tensioner
  Courtesy of HYUNDAI MOTOR AMERICA
2. Using the wrench, turning the drive belt tensioner (A) counterclockwise.
  
  Fig 2: Locating Drive Belt Tensioner
  Courtesy of HYUNDAI MOTOR AMERICA
3. Connect the drive belt (A).
  
  Fig 3: Engine Drive Belt Routing Diagram
  Courtesy of HYUNDAI MOTOR AMERICA
4. Remove the wrench.