LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> Dynamic Damper >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  3. Remove both side bands (B) of the dynamic damper (A).
    Fig 1: Removing Both Bands Of Dynamic Damper
    G12025916Courtesy of HYUNDAI MOTOR AMERICA
  4. Fix the driveshaft (A) in a vise (B) as illustrated.
    Fig 2: Fixing Driveshaft In Vise
    G12025917Courtesy of HYUNDAI MOTOR AMERICA
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
    Fig 3: Separating Dynamic Damper From Shaft
    G12025918Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals