LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Value Edition >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> Driveshaft Assembly >> BJ Boot >> Repair Procedures >> Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
  2. Using the SST (09495-3K000), secure the BJ boot bands.
    Fig 1: Securing BJ Boot Bands Using Special Service Tool (09495-3K000) (1 Of 2)
    G12025937Courtesy of HYUNDAI MOTOR AMERICA
    Fig 2: Securing BJ Boot Bands Using Special Service Tool (09495-3K000) (2 Of 2)
    G12025938Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Do not reuse the boot band.
  3. Install the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  4. Install the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  5. Check the front alignment.

    (Refer to Front Alignment - "ALIGNMENT ")

scientia non olet · About LEMON Manuals