LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Sport, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 1.6L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1/Intake]

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
Fig 1: Locating Intake Camshaft Position Sensor Connector And Bolt
G12024203Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals