LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra SE, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 197 (Airbag Modules And Clock Spring) >> Knee Airbag (KAB) Module >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the knee airbag module (A) after loosening the mounting nuts.
    Fig 1: Removing Knee Airbag Module Mounting Nuts
    G12026561Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the knee airbag module connector (A).
    Fig 2: Disconnecting Knee Airbag Module Connector
    G12026562Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals