LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Power Windows) >> Power Window Switch >> Repair Procedures >> Inspection >> [Driver Power Window Switch]

[Driver Power Window Switch]

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Disconnect the power mirror switch connector from the door trim.
    Fig 1: Driver Power Window Switch Connector Terminals
    G12023614Courtesy of HYUNDAI MOTOR AMERICA
  4. Check for continuity between the terminals in each switch position as displayed below.

    [Power Window Switch Inspection] 

    Fig 2: Power Window Switch Terminals Continuity Chart
    G12023615Courtesy of HYUNDAI MOTOR AMERICA

    [Power Door Lock Switch Inspection] 

    Fig 3: Power Door Lock Switch Terminals Continuity Chart
    G12023616Courtesy of HYUNDAI MOTOR AMERICA

    [Power Window Lock Switch Inspection] 

    Fig 4: Power Window Lock Switch Terminals Continuity Chart
    G12023617Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals