LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Power Windows) >> Power Window Switch >> Repair Procedures >> Inspection >> [Assist Power Window Switch]

[Assist Power Window Switch]

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the assist door trim.

    (Refer to Body - "FRONT DOOR TRIM ")

  3. Disconnect the power mirror switch connector from the door trim.
  4. Check for continuity between the terminals in each switch position as displayed below.
Fig 1: Assist Power Window Switch Connector Terminals
G12023618Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Assist Power Window Switch Terminals Continuity Chart
G12023619Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals