LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Brake System) >> Rear Disc Brake >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Use a SST (09580-0U000) when installing the brake caliper assembly.
    Fig 1: Installing Brake Caliper Assembly Using Special Service Tool (09580-0U000)
    G12026928Courtesy of HYUNDAI MOTOR AMERICA
    NOTE:
    • Wind the piston into the caliper body until it is fully retracted.
    • Do not use any power assisted tools for this task.
  3. After installing, bleed the brake system.
scientia non olet · About LEMON Manuals