LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Brake System) >> Brake Booster >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    NOTE:
    • Before installing the pin, apply the grease to the joint pin.
    • Use a new snap pin whenever installing.
  2. After installing, bleed the brake system.

    (Refer to Brake System - "BRAKE SYSTEM BLEEDING ")

    (Refer to Brake System - "ABS SYSTEM BLEEDING ")

    (Refer to Electronic Stability Control (ESC) System - "ESC System Bleeding ")

scientia non olet · About LEMON Manuals