LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 243 (MULTIFUNCTION Switch) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the steering wheel.

    (Refer to Steering System - "STEERING WHEEL ")

  3. Remove the steering column upper and lower shrouds after loosening the screws.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  4. Remove the clock spring.

    (Refer to Restraint - "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

    Fig 1: Clock Spring
    G12023247Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the multifunction switch connector (A).
    Fig 2: Locating Multifunction Switch Connector
    G12023248Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the multifunction switch assembly (A) after loosening the screws.
Fig 3: Locating Multifunction Switch Assembly With Screws
G12023249Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals