Repair Procedures: Disassembly

WARNING: This page is about a different car, the 2017 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the bolt (A) and then disconnect the universal joint assembly from the steering column assembly.
Tightening torque:

49.0 - 58.8 N.m (5.0 - 6.0 kgf.m, 39.8 - 43.4 lb-ft)

Fig 1: Disconnecting Universal Joint Assembly From Steering Column Assembly
Courtesy of HYUNDAI MOTOR AMERICA
To reassembly, reverse the disassembly procedure.
Reassembly is the reverse of the disassembly.
NOTE:
- Do not reuse the universal joint bolt. When assembling, match the gear teeth as displayed below.
Fig 2: Locating Universal Joint
Courtesy of HYUNDAI MOTOR AMERICA